Since 1984, HP Printers are providing print and scan services to its customers. Millions of people are using the HP Printer services and they are much satisfied with the high-quality prints of these printers. Whether you have to print artwork, document, or photo, the HP Printers helps you to perform all these tasks with great print quality. These printers can print continuously without any issue or error. However, your HP Printer may go into an error state due to several factors such as outdated printer driver, low ink cartridges, cable connection problems, or there would be an issue with the printer hardware itself. Whenever you face HP Printer in error state issue, you need to fix it quickly to print a paper.
So, if you are also one of them who are experiencing an issue with their HP LaserJet and HP Deskjet Printer then you need to read the solutions that we are going to discuss on this page. Make sure to check that your HP Envy Printer is connected to the AC power source.
What to do if my HP Printer is in error state?
If your HP Printer is in an error state then you need to apply definite solutions to fix this issue. The solutions that will help you to fix HP Printer in error state issue are given below:
Solution 1: Check Cable Connections
Check that the HP Printer is turned on and it is connected to the AC power supply. You can also check for any loosened cable connection. If there is any damaged cable then you need to replace it immediately to bring out the printer from an error state.
Solution 2: Update the HP Printer Driver
HP Printer can be connected with your Mac or Windows computer with the help of printer drivers. You are advised to use the latest version of the printer driver on your device. In case you are using an older version of the printer driver then you may not be able to access the printing services on your HP Printer. So, to fix this situation, you need to take the help of HP Printer Assistant to update the driver automatically.
Solution 3: Check the Ink level of printer cartridges
If the cartridges are showing low ink levels then you need to replace the cartridges immediately. Make sure to remove any jammed paper from the cartridges section of your printer. After replacing the cartridges of your printer, make sure to check that the HP Printer in error state issue has been fixed or not by taking a print test.
Solution 4: Set your HP Printer as a default printer
You are always suggested to set your HP Printer as a default printer. In case you have not done so then you need to follow the steps that are given below:
- Navigate yourself to the ‘Settings’ of your device
- Then, find and click the ‘Devices and Printers’ option
- Get the address of your printer and click on it
- From the available options, find and check the ‘Set as default’ option
- Finally, you have set the HP Printer as a default printer
Way to fix HP Printer in error state Windows 10
People who are experiencing the HP Printer in error state issue on their Windows 10 computer need to open the printer troubleshooter on their Windows 10. The steps to fix the HP Printer in error state Windows 10 issue are given below:
- Visit the ‘Start’ button and click on it
- Now, find and click the ‘Control Panel’ option
- Then, find the ‘Troubleshooter’ option and click on it
- Run the troubleshooter on your device
After running the troubleshooter on your Windows 10 computer, the HP Printer in error state issue will be fixed. The same process will also help you to fix the HP Printer offline issue.
To sum up, HP Printers may show errors due to several reasons. The error state on HP Printers may stop you to use its printing services. Whenever you face such an issue with your HP Printer, you need to apply some definite ways to fix it quickly. For the people who are not sure about the ways to fix the HP Printer in error state issue, we have described clear instructions above on this page. Hopefully, you have fixed the HP Printer error with the help of this post.